Pro Edge Technology 3 Axis CNC Router & Lockdowel Insertion Machine
Routers$59,995.00 USD |
The PET 2440-LD is the only machine in the industry with VERTICAL ROUTING CAPABILITIES on the
bottom surface of the panel which guarantees accuracy of 0.1mm of router depth by making the bottom of the panel a TRUE zero reference point. This machine removes the need for expense floating head aggregates or a live Z-axis laser measurement device on a flat table router -AND-
100% routing and insertion of any Lockdowel fastener component on the edge of the panel and vertical routing within 100mm of the panel bottom surface edge.
The PET 2440-LD Router and Fastener Inserter is ideal for either the high production panel processing shop or the custom production shop.
The versatile PET 2440-LD allows for horizontal boring and fastener insertion in the panel’s edge AND
has the added feature of being capable of routing vertically and horizontally to perform such features as blind dado, production of 5-piece doors, routing Soss hinges, hardware location, hinge cups, recessed hardware and much more.
This specific machine has only a few hours on it and was never put into production!!! Rare opportunity for massive savings!
MAXIMUM LENGTH OF PART (USING 1 ZONE) 2440 mm / 96”
MAXIMUM THICKNESS OF PART 50 mm / 2”
4 INDEPENDENT ZONES 600 mm / 23.6”
CENTER STOP FOR ZONES 2 & 3 Raised and lowered by CNC
ELECTRO SPINDLE 1.5 kW / 2 HP
VARIABLE SPEED OF ELECTRO SPINDLE 4,000 - 24,000 RPM
SPEEDS FOR X, Y & Z
X = 40 m/min / 131 fpm
Y = 10 m/min / 32 fpm
Z = 10 m/min / 32 fpm
PROGRAMMABLE LIMITS FOR X, Y & Z
X = 2440 mm / 96”
Y = 80 mm / 3.15”
Z = 50 mm / 2”
4 INDEPENDENT VIBRATOR FEEDERS 5mm spring pin, 5mm mini barbed channel lock,
8mm spring pin, 8mm barbed channel lock
AUTOMATIC LASER MEASUREMENT SYSTEM Selectable on/off through program
CYCLE SPEED 60 cycles per minute (drills or dowel inserts)
FIBER OPTIC SENSORS For Lockdowel fasteners present to prevent misfires
VOLTAGE 10 kW / 220 V / 1 Ph
40 amps
4 Fastener Insertion Injectors
• Consisting of: (1) 5mm and (1) 8mm spring pin, and (1) 5mm mini and (1) 8mm barbed channel lock fastener.
• All injectors are CNC controlled for accuracy and positioned forward by a pneumatic cylinder.
• Each injector is independently mounted on a heavy duty linear bearings and rail.
• (10) spring pin, (14) 8mm barbed channel lock and (17) 5mm
mini barbed channel lock fasteners are auto loaded into the injector, at one time.
• Photo eye detection ensures the fastener is properly loaded into injector before firing, eliminating misfires.
• 5mm and 8mm spring pin injector rods have been redesigned so the spring pin is injected with a smoother insertion and accuracy while exiting the injector.
Stainless Steel Injector Magazines
• Each magazine is independently and automatically loaded during the operation of the work list. • Each magazine holds approximately 20 fasteners.
Laser Measuring Device
• Used for on-the-fly measuring of part.
• Selectable through software.
• Used in conjunction with the parametric programming.
Vibrator and Automatic Magazine Fastener Feeder with a separate PLC controlled pendent for each feeder.
5mm & 8mm Spring Pin Feeder with NEW Jam-free design.